Skip to content
Advanced Detailing Sofla
(954) 632-1582
Tesla Model Y with window tint at Advanced Detailing Sofla in Pompano Beach
Advanced Detailing Sofla

Tesla Window Tint in Pompano Beach, FL

Tesla window tint in Pompano Beach, FL uses XPEL PRIME XR Plus ceramic film to reduce infrared heat and UV exposure through Tesla side, rear, and roof glass. Advanced Detailing Sofla has provided window tinting since 2000, with one vehicle handled at a time and complimentary pick-up and drop-off available for qualifying services.

Get A Free Quote → Call (954) 632-1582
  • XPEL
02 — Why Us

Why Choose Advanced Detailing Sofla for Tesla Window Tint

  • 01

    XPEL PRIME XR Plus: Rejects up to 96% of infrared radiation and more than 99% of UV rays, according to XPEL.

  • 02

    20+ Years of Experience: Advanced Detailing Sofla has provided automotive window tinting since 2000, bringing more than two decades of hands-on experience.

  • 03

    Non-Metallic Ceramic Film: XPEL PRIME XR Plus is a non-metallic ceramic film designed to provide heat rejection without the signal interference associated with metallic films.

  • 04

    4.9-Star Google Rating: Advanced Detailing Sofla has a 4.9-star Google rating across approximately 100 reviews.

  • 05

    One Vehicle at a Time: Tesla window tint is installed in-shop with one vehicle handled at a time, from glass preparation through final inspection.

  • 06

    Complimentary Pick-Up & Drop-Off: Complimentary vehicle pick-up and drop-off is available for qualifying services across Pompano Beach and surrounding Broward County.

03 — Included

What Tesla Window Tint Includes

Service TypeWhat's IncludedTypical Time
Side & rear window tintXPEL PRIME XR Plus film cut to each Tesla's side and rear glass2 to 4 hours
Windshield tintFilm applied above the AS-1 line, where Florida law permits2 to 4 hours
Sunroof / glass-roof tintHeat-rejecting film for the panoramic roof1 to 2 hours
Full-vehicle tint packageCoverage set by Tesla model and Florida tint limitsVaries

XPEL PRIME XR Plus is a dual-layer nano-ceramic film that fits Tesla Model 3, Model Y, Model S, and Model X. Among the window tint types available for Teslas, from dyed and metalized films to ceramic, this nano-ceramic film rejects up to 96% of infrared heat and over 99% of ultraviolet light, cutting cabin temperature and easing the load on the climate system. Because the film is non-metallic, it maintains that heat rejection without dulling optical clarity or interfering with signals. The film is backed by XPEL's manufacturer warranty.

Coverage spans the side glass, rear glass, windshield strip, and panoramic roof, with the window tint percentage, measured as visible light transmittance (VLT), matched to Florida limits: at least 28% VLT on the front side windows, 15% VLT behind the driver on Model 3 and Model S sedans, and down to 6% VLT on Model Y and Model X rear glass. The film bonds to clean, decontaminated glass along the gaskets and edges for a tight, bubble-free finish. Windshield film is applied only above the AS-1 line, where Florida Statutes 316.2951 to 316.2957 allow it.

The tint carries no more than 25% reflectivity on the front side windows to stay within Florida code, and a compliance label is set inside the left door jamb once the install is complete. Ceramic film shields the leather, dashboard, and trim from the fading and cracking that the sustained South Florida sun causes over time.

Tesla Model 3 with window tint at Advanced Detailing Sofla in Pompano Beach
04 — Method

How Our Tesla Window Tint Process Works

01

Inspect the Glass

Our technicians inspect the factory glass on your Model 3, Y, S, or X and confirm VLT targets against Florida limits.

02

Cut the Film

We pre-cut each XPEL PRIME XR Plus panel on a computerized plotter to match the exact contours of the side, rear, windshield, and roof glass.

03

Prep and Apply

Our team cleans and decontaminates every panel of glass, then squeegees the nano-ceramic film onto the prepared surface, working the slip solution out for a tight edge seal.

04

Cure and Inspect

We heat-set and inspect each panel for alignment, edge fit, and clarity before the Tesla leaves the shop.

05 — Gallery

Recent Window Tint Projects by Advanced Detailing Sofla

Tesla Model S with window tint at Advanced Detailing Sofla in Pompano Beach
Tesla Model X with window tint at Advanced Detailing Sofla in Pompano Beach
Tesla Cybertruck with window tint at Advanced Detailing Sofla in Pompano Beach
06 — Pricing

Tesla Window Tint Pricing in Pompano Beach

Tesla window tint starts at $400 for sedans and $500 for SUVs. Windshield tint is $200 to $250, while sunroof or panoramic roof tint is $150. Final pricing depends on the Tesla model, glass configuration, and selected coverage.

Tesla Cybertruck at Advanced Detailing Sofla in Pompano Beach
07 — Coverage

Areas We Serve Near Pompano Beach

Town / AreaDrive Time To Shop
Pompano Beach, FL5 min
Palm Aire6 min
Cypress Bend6 min
Cresthaven12 min
Highlands12 min
Deerfield Beach15 min
Boca Raton18 min
Fort Lauderdale20 min
Parkland22 min
Coral Springs25 min
Delray Beach28 min
Weston38 min
Palm Beach45 min

Drive times are approximate and vary with traffic. Outside these areas? Call (954) 632-1582 to confirm coverage. Free pick-up and drop-off is available for qualifying services across Pompano Beach and Broward County.

Tesla Model X at Advanced Detailing Sofla in Pompano Beach
08 — Reviews

See Our Customer Reviews

Verified Google reviews
09 — Book

Book Your Tesla Window Tint

Ready to tint your Tesla? Book Advanced Detailing Sofla at (954) 632-1582 for XPEL PRIME XR Plus ceramic tint in Pompano Beach. Pricing starts at $400 for sedans and $500 for SUVs, with installation time varying by coverage.

Get A Free Quote

10 — Answers

Frequently Asked Questions About Tesla Window Tint

Tesla window tint starts at $400 for a sedan (Model 3, Model S) and $500 for an SUV (Model Y, Model X) at Advanced Detailing Sofla. Windshield tint runs $200 to $250, and sunroof tint is $150. Final pricing depends on the Tesla model, glass configuration, and how many windows are covered.

Tesla window tint installs in about 2 to 4 hours for the side and rear glass, and 1 to 2 hours for a glass roof or sunroof. Model 3, Model Y, Model S, and Model X all fall within this range. The film then needs a few days to cure, so the windows should stay up during that period.

Tesla window tint reduces cabin heat by rejecting up to 96% of infrared energy with XPEL PRIME XR Plus ceramic film, which eases the air-conditioning load. Lower AC draw can help preserve driving range, especially when a Tesla sits in direct South Florida sun. The film also blocks over 99% of UV rays.

Window tint using non-metallic XPEL PRIME XR Plus does not interfere with GPS, cellular, or Bluetooth signals, because the ceramic film contains no metal. Side and rear tint sits away from the forward-facing cameras mounted behind the windshield, and windshield film is applied only above the AS-1 line. Tesla's driver-assist hardware keeps a clear line of sight.

Advanced Detailing Sofla tints Tesla windshields and glass roofs where Florida law permits, applying XPEL PRIME XR Plus film only above the AS-1 line on the windshield. Sunroof and panoramic-roof tint is priced at $150. The shop confirms legal placement for your specific Tesla model and affixes the required compliance label to the left door jamb.

11 — About

About Advanced Detailing Sofla

Advanced Detailing Sofla provides professional Tesla window tinting in Pompano Beach, FL, using XPEL PRIME XR Plus ceramic film. The service covers Tesla Model 3, Model Y, Model S, and Model X glass, including side windows, rear glass, windshields where permitted, and panoramic roofs. Each installation is performed in-shop with careful glass preparation, precise film fitment, and a final inspection for alignment, edge coverage, and optical clarity.

Tesla Model S at Advanced Detailing Sofla in Pompano Beach